Hydraulic Directional Control Valve 7 Spool 11GPM, 40L, BSPP Interface 2 Joystick

  
It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction, and well-known industries. The distributor is adapted to different types of machines, such as B. Agricultural machines, tractors, sprayers, round vehicles, cyclo-loaders, HDS loaders, construction machinery, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 - 40 l / min. Example control: two 2-way drives.

Possibility of serial connection to the existing system (pressure sleeve required). Hydraulic Directional Control Valve 7 Spool 11GPM, 40L, BSPP Interface 2 Joystick. Joystick with five positions (1 - 2 - 0 - 3 - 4) on the spring, i. Position 0 neutral (joystick positioned vertically) piston rods of both drives are stationary - oil overflows. Working position 1 (joystick lever tilted forward) The piston rod of the first actuator extends.

Working position 2 (joystick lever in an inclined position) The piston rod of the first drive is retracted. Working position 3 (joystick lever inclined to the left) The piston rod of the other drive extends. Working position 4 (joystick lever inclined to the right) The piston rod of the other drive is retracted. Pump supply (P1, P2): BSPP G1/2 internal thread.

Back to the tank (T1, T2): BSPP G1/2 internal thread. Sections (A1, A2; B1, B2): BSPP G1/2 internal thread. Serial connection (N): BSPP G1/2 internal thread.

Maximum pressure on the supply: 250bar. Maximum return pressure: 50 bar. Maximum pressure on the sections: 300 bar. The overflow valve is factory-set to 175 bar. Possibility of self-regulation, full turnover change by 30bar.

Hydraulic Valve 7 Spool 11gpm. We will do everything we can to give you a satisfying solution. We do our best to resolve any issue. So please talk with us and we will not let you down. FEEDBACK IS VERY IMPORTANT TO US. Car engine rocker arm Kit. Auto Inlet & Outlet System.

Fuel Line Kits & Components. Gasoline tank & filling pipe.

2× For Stihl 25-2 Trimmer Head REBUILD KIT FS 100 110 120 130 44 55 80 83 85 90. 25 Pack Cut Off Wheels 3"x1/32"x3/8 Die Grinder Metal Cutting Disc.

Carb For Kohler Carter 16 K90 K91 K141 K160 K161 K181 Engine Motor Carburetor. Carburetor For Briggs & Stratton 499953 495457 3-3.5HP 92200 802200 Engine. 12.5HP Carburetor Fit For Briggs Stratton LMT-165 LMT-166 LMT-162 Carb Engine.

3 Prong 50 Feet 30 AMP Generator Extension Cord NEMA L5-30P to L5-30R 125V. Straight Shank Tool Holder Collet Chuck C1 ER16M 100L for CNC Lathe Milling. Pressure Power Washer Pump 4.0 GPM 1 Hollow Shaft Water Pump 4000 psi New. 2 HP General Electric Motor 3 Phase 56C Frame 1800 RPM TEFC 230 / 460 Volt New.

Electric Motor Compressor Duty 56 Frame 1 Phase 115/230 Volts 3 HP 3450 RPM New.