Position 0 neutral (vertical joystick) piston rods of both cylinders are stationary - oil flows to the overflow. Working position 1 (joystick lever in forward position) The piston rod of the first cylinder extends. Working position 2 (joystick lever tilted backwards) The piston rod of the first cylinder retracts. Working position 3 (joystick lever inclined to the left) The piston rod of the second cylinder extends. Working position 4 (joystick lever inclined to the right) The piston rod of the second cylinder retracts.
All three position levers (1 - 0 - 2) are spring loaded, i. Position 0 neutral (lever in vertical position) cylinder piston rod is stationary - oil overflows. Working position 1 (lever in forward position) The cylinder piston extends. The 2 working position (lever backwards) of the piston rod of the cylinder retracts.The lever can be positioned parallel or perpendicular to the joysticks. Pump supply (P): BSP 1 / 2``internal thread return to the tank (T): BSP 3 / 4''internal thread section outlet (A, B): BSP 1 / 2''internal thread.
Maximum inlet pressure: 250 bar Maximum return pressure: 50 bar Maximum pressure on the sections: 300 bar. Factory set relief valve to 175Bar Self-adjusting, full rotation, change by 30Bar.
