7 Spool 2 Joysticks Monoblock Hydraulic Directional Control Valve 11gpm 40L/M

NOTE: After placing the order, we issue VAT invoices for European Union countries. HYDRAULIC DISTRIBUTOR 7 SECTION P40.

CONTROLED WITH TWO JOYSTICKS AND THREE LEVER. It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and the broadly understood industry.

The distributor is adapted to various types of machines such as: agricultural machines, tractors, sprayers, rounds, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices. Recommended oil flow: 0 - 40 l / min.

Example control: seven 2-way actuators. Possibility of serial connection to the existing system (pressure sleeve required). Both five-position joysticks (1 - 2 - 0 - 3 - 4), on the spring, so they return themselves to the vertical. Position 0 neutral (joystick vertically positioned) piston rods of both actuators are standing - oil goes to overflow. Working position 1 (joystick lever in diagonal position forward) the piston rod of the first actuator extends.

Working position 2 (joystick lever in oblique position) the piston rod of the first actuator is being retracted. Working position 3 (joystick lever in an oblique position to the left) the piston rod of the other actuator extends. Working position 4 (joystick lever in diagonal position to the right) the piston rod of the other actuator is being retracted. All three-position levers (1 - 0 - 2), on the spring, ie they return themselves to the vertical.

Position 0 neutral (lever positioned vertically) the cylinder piston is standing - oil goes on the overflow. Working position 1 (lever in diagonal position forward) the actuator's piston rod extends. Working position 2 (lever in diagonal position backwards) the actuator's piston rod retracts. Pump supply (P1, P2): BSP 1/2internal thread. Return to the tank (T1, T2): BSP 1/2internal thread.

Sections (A1, A2, A3, A4, A5, A6, A7, B1, B2, B3, B4, B5, B6, B7): BSP 3/8internal thread. Serial connection (N): BSP 1/2 internal thread.

Maximum pressure on the supply: 250Bar. Maximum pressure on the return: 50 Bar. Maximum pressure on sections: 300Bar.

The overflow valve is factory set to 175 Bar. Possibility of self-regulation, full turnover change by 30Bar. The item "7 Spool 2 Joysticks Monoblock Hydraulic Directional Control Valve 11gpm 40L/M" is in sale since Sunday, December 1, 2019.

This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Directional Control Valves\Spool Valves". The seller is "hydraulic-center" and is located in Torun. This item can be shipped to United Kingdom, North, South, or Latin America, all countries in continental Asia, Ireland, Australia, Greece, Italy, Spain.

MPN: Does Not Apply
Port Diameter: BSP 3/8 in , 1/2 in
Valve Operation: Manual
Maximum Pressure: 320 bar
Brand: Perfect Hydraulic
Maximum Flow Rate: 12 gpm
Spool Count: 7-Spool